10 Best Mavic 2 Accessories

Bought a Mavic 2? Surely, you’ve already been looking at some accessories to take your drone to greater heights and fully maximize its potential.

From filters to cases to monitor mounts, here are 10 accessories from California drone filter design experts PolarPro, to get the most out your Mavic 2 Pro or Zoom.

PolarPro Filters - Cinema Series Collection
PolarPro - Landing Gear
PolarPro - SunShade
PolarPro - Phone Mount
PolarPro - Tablet Mount
PolarPro - Extension Remote Sticks
PolarPro - Katana 2
PolarPro - Minimalist Case
PolarPro - Rugged Case

PolarPro Filters - Cinema Series Collection
PolarPro Cinema Series Filters are designed to reduce camera shutter speed so that you can create smooth cinematic aerial videos with your Mavic 2. PolarPro filters thread on in place of the stock DJI UV filter, ensuring easy installation and correct gimbal balance, no counterweight required. Built with AirFrame construction, total filter weight is radically reduced allowing fluid compatibility with the Mavic 2 gimbal system. The Cinema Series Collection includes neutral density (ND), neutral density + polarizing (ND/PL) and gradient neutral density (ND-GR) filters, available in 3 pack, 6 pack or custom filter pack and single filter options.

New to the Cinema Series Mavic 2 ND/PL filters are polarization reference indicators built into the frames for quick and easy polarization adjustment. Each filter features Cinema Series production grade multi-coated glass to get the most dynamic detail from the Mavic 2 Pro’s Hasselblad camera, to give your Mavic 2 content that professionally defined, cinematic look. Cinema Series Filters are available for both Mavic 2 Pro and Zoom models.


PolarPro - Landing Gear
PolarPro’s Landing Gear securely locks on to the Mavic 2 for an additional 1.5 inches of ground clearance, protecting your Mavic 2 gimbal and camera from dirt, dust, and debris during takeoff and landing. The additional ground clearance provides a layer of protection in the event of an emergency landing or crash, and the Landing Gear also widens the stance of the Mavic 2, for more stability on difficult terrain or uneven landing surfaces. It’s like turning your Mavic 2 into an all-terrain vehicle. Featuring foldable gears so that you can leave the Landing Gear on the drone while still keeping a low profile, this unique solution gives your new expensive drone just a bit more security on rough takeoffs or landings. The lightweight nylon design provides structural rigidity but does not hinder the flight performance or battery life of the Mavic 2.

PolarPro - SunShade
PolarPro’s foldable, pocket-sized DJI Mavic 2 SunShade increases screen visibility when filming outdoors in bright sun by blocking out glare and reflected light. The SunShade can be used on the Mavic 2 remote and fits mobile phones as large as an iPhone 7 Plus (does not fit iPhone 8 Plus).

The SunShade adjusts to fit a wide range of phones with improved monitor-remote connection over PolarPro’s previous Mavic Pro model.
PolarPro - Phone Mount
If you’re not satisfied with the placement of your phone below the controls on the Mavic 2 remote, PolarPro’s Mavic 2 Phone Mount attaches mobile phones to the Mavic 2 remote above the controls in an easier to view location, enabling you to better see your live feed and also to leave your mobile device (up to iPhone 7 Plus with slim case) in a protective case while flying. Like many of PolarPro’s solidly built products, the Phone Mount utilizes durable glass-filled nylon that provides structural integrity ensuring your phone stays securely locked onto the Mavic 2 remote until you are done flying. With portability in mind, the Phone Mount collapses down and fits inside itself.

Since their original design for Mavic Pro, PolarPro’s Mavic 2 Phone Mount has been redesigned to work with the Mavic 2 SunShade, giving you extra screen protection from the sun and enhanced visibility in bright conditions.

PolarPro - Tablet Mount
Our DJI Mavic 2 Tablet Mount securely attaches tablet devices up to a 10.5 inch iPad Pro to the Mavic 2 remote in an easy to view location and allows you to leave on your protective tablet case (up to 174.5 mm thick). The tapered mount frame fits comfortably in your hands and folds up for easy storage, and is structurally engineered to withstand the weight of heavier tablets without flexing or moving on the controller, so you can focus on your flight and not worrying about losing your monitor in the process.

PolarPro - Extension Remote Sticks
Originally introduced for Mavic Air, PolarPro extension remote sticks for Mavic 2 follow the same design, and are adjustable in length from 0.75 inches (stock size) to 1.25 inches, giving those with large thumbs or limited hand dexterity more precise control over the Mavic 2 remote’s small, stock thumbsticks.

Built from lightweight machined aircraft aluminum for durability, with a textured finish that provides enhanced thumb traction so you can better control the flight and camera movements of your Mavic 2. When you’re through flying, PolarPro extension thumbsticks fit inside the Mavic 2 remote just like the stock DJI thumbsticks.

PolarPro - Katana 2
Katana is a handheld tray system that enables you to shoot smooth handheld photos or videos in places where you can’t fly your DJI drone, like at national parks, world heritage sites, indoors or in tight spaces. Katana lets you harness the power of your DJI Mavic 2 gimbal for perfectly calibrated handheld shots.

Paired with the Mavic 2 Pro’s 1 inch Hasselblad camera, adventurers can use the Katana to capture ultra smooth Ronin-S caliber content. This gives you the ability to travel light and shoot an entire cinematic production with just the Mavic 2. Katana for Mavic 2 also includes PolarPro’s Overslung T-grip handle as part of the Katana package. In situations where you need to hold your camera low, use the Katana Overslung T-grip.

PolarPro - Minimalist Case
The Minimalist Case is primarily designed to be small and compact to fit inside other backpacks or luggage. However, the EVA case on its own still provides ample protection, as PolarPro has doubled down on protection by adding an additional shock absorbing base layer, without increasing overall dimensions. The new base layer provides extra protection for your Mavic 2, with extra room in the main compartment for 3 extra batteries, remote controller, and cables. The PolarPro Minimalist Case also features a new compact exterior pocket for quick access to filters or other important accessories and a reinforced handle that will withstand larger weight loads on more demanding adventures.

PolarPro - Rugged Case
Another solid offering from PolarPro, the DJI Mavic 2 Rugged Case is made to offer maximum protection and shock absorption on more challenging and demanding shoot locations. Features custom foam inserts to snugly hold your Mavic 2, 4 extra batteries, remote, charger, charging hub, cables, and filters. The custom foam insert acts as a large shock absorber and prevents your drone and accessories from moving around during transit. Additionally, the Rugged Case features a water-resistant outer shell that allows water to bead off the surface. For the heavier adventures, the Rugged Case has been shocked tested to withstand a cliff drop up to 30 feet. A removable shoulder strap is included for added carrying configurations. The semi-rigid custom molded outer shell provides enhanced protection over the fabric case included with the DJI Fly More Kit while still maintaining a slim and low-profile that you just can’t get with a hard case. Compatible with Mavic 2 Pro and Zoom model drones.

You can check out the full Mavic 2 filter and accessory lineup from PolarPro at polarpro.com